Service & Support
Support Home
Warranty Information
Support Options
RMA Status
Warranty Policy
Service Partners
Contact Us
Data Lifeguard Tools
What is Data Lifeguard?
Online Diagnostic
Download Data Lifeguard
Downloads Library
Hard Drives Software
Ace Software & Drivers
Technical Information
Knowledge Base
Document Library
Product Specification
Firewire Product Info
Jumper Settings
Diagnostic Error Codes
Online Forum
Additional Info
Rebate Status
Archive Documentation
Support Site Map
Site Feedback
|
 |
Software Library
Quick Links |
Data Lifeguard Tools |
á |
|
Combo/USB/Firewire/Serial ATA Drivers |
á |
|
EIDE RAID Drivers |
á |
|
Archived/Miscellaneous |
á |
|
|
á
Data Lifeguard Tools V. 11.0 |
Data Lifeguard v11.0 for Windows
98SE/2000/ME/XP
September, 2003
(3.47 MB)
Data Lifeguard v11.0 for DOS
ZIP Version (1.56 MB)
EXE Version (1.74 MB)
98SE/2000/ME/XP
September, 2003
|
The downloadable Data Lifeguard Tools now comes in both DOS and Windows
versions and was written specifically for the installation of Western
Digital EIDE hard drives. If your computer system already has a hard
drive installed with an operating system of Windows 98SE or greater,
you should use the Windows version of Data Lifeguard for best results.
The DOS version is required if installing a hard drive in a new system
without existing operating system support.
New features:
- Certified to work on all current WD drives (model numbers starting with "WD")
- Friendly user interface and easy to use
- GUI Interface Drive Installation Software
- Printable tutorial customized to help you optimize your configuration
- Improved drive to drive copy capability
- (Windows
version) Will work with Windows 2000 SP3 and Windows XP SP1 to overcome
the 137GB barrier without the need for a controller card
á
|
|
|
Diagnostic Utilities |
DLG Diagnostic
dlgdiag11.zip
September, 2003
(1.52 MB)
|
The Diagnostics utility allows you to test the drive, print results for
last drive tested, repair errors found during the Test Drive option and
write zeros to the drive. |
BIOS Check
dlgchk10.zip
August, 2002
(39 KB)
|
BIOS Check reports number of drives physically detected, number of
drives accessed by the BIOS and additional drive table information.
This utility was written so end users can report their system
configuration to Western Digital technical support personnel when
discussing disk drive issues. |
Ultra ATA Manager
dlgudma.zip
June, 2003
(158 KB)
|
This utility is used to enable or disable the Ultra ATA 33/66/100
capability on Western Digital EIDE drives that support this feature. |
|
|
Data Lifeguard Diagnostics - DLGDIAG for Windows |
Win DLG
Ver. 1.0
April, 2003
(428 KB)
|
This
is a Windows version of the Data Lifeguard Diagnostics utility. The
utility can perform drive identification, diagnostics, and repairs on a
Western Digital FireWire, EIDE, or USB drive. In addition, it can
provide you with the drive's serial and model numbers. |
|
|
SIIG Serial ATA Controller Windows Driver |
Windows Driver
98SE/2000/ME/XP/2003
October, 2003
(172 KB)
|
This
Windows Driver is for use with the SIIG Serial ATA controller card
included with some Western Digital hard drives. To use, please extract
this zip file to a blank floppy. Afterward, follow the instructions
included with your drive and controller card to update your OS with the
new driver.
|
|
|
External Combo FireWire/USB 2.0 Driver |
Combo Driver
EXE Version (1.86 MB)
ZIP Version (1.78 MB)
98SE
October, 2003
|
Windows 98SE users only:
The device drivers are necessary for your system to communicate with
your Series II USB 2.0 external hard drive. You must install the device
drivers on your system prior to connecting the external hard drive. It
is not necessary to download the device drivers for Windows ME, 2000
& XP. Note: If you are having problems downloading the
software, please disable any pop-up blocker software that is installed
on your system.
|
|
|
Series II USB 2.0 Hard Drive |
USB 2.0 Driver
EXE Version (1.86 MB)
ZIP Version (1.78 MB)
98SE
October, 2003
|
Windows 98SE users only:
The device drivers are necessary for your system to communicate with
your Series II USB 2.0 external hard drive. You must install the device
drivers on your system prior to connecting the external hard drive. It
is not necessary to download the device drivers for Windows ME, 2000
& XP. Note: If you are having problems downloading the
software, please disable any pop-up blocker software that is installed
on your system.
|
|
|
Series I USB 2.0 Hard Drive |
USB 2.0 Driver
98SE
August, 2002
(1.52 MB)
Install Guide
August, 2002
(PDF, 569 KB)
|
Windows 98SE users only:
The device drivers are necessary for your system to communicate with
your Series I USB 2.0 external hard drive. You must install the device
drivers on your system prior to connecting the external hard drive. It
is not necessary to download the device drivers for Windows ME, 2000
& XP.
|
|
|
Promise Ultra TX2 Windows Driver |
Ultra TX2 Driver
Ver. 2.0.0210.36
December, 2002
(116 KB)
|
This Windows Driver is for use with the Promise Ultra 100 TX2
controller card when used with Western Digital hard drives greater than
137GB. To use, please extract this zip file to a blank floppy.
Afterward, follow the instructions included with your drive and
controller card to update your OS with the new driver. |
|
|
Promise Ultra TX2 BIOS Upgrade |
Ultra TX2 BIOS
Ver. 2.0.0210.2
November, 2002
(35 KB)
|
This BIOS upgrade is for use with Promise Ultra TX2 controller cards
when used with Western Digital hard drives greater than 137GB. |
|
|
IDE RAID Compatibility Upgrade Utility for 3Ware 7500-X controllers cards |
IDE RAID Upgrade - 3Ware
Ver. 1.07
April, 2003
(140 KB)
|
The utility runs within DOS and is used to update WD drives that are
connected to one or more 3Ware 7500-X IDE (Parallel ATA) RAID
controllers. Affected drives:
- WD drives with capacities between 40GB & 120GB
- WD drives with greater than 120GB capacity with Mfg. date codes earlier than 3/25/03
Please check the Technical FAQ
for additional information. Please refer to the readme.txt file for
instructions to follow on systems utilizing multiple 3Ware 7500-X IDE
RAID controllers. Note:The utility will NOT run in DOS within Windows.
|
|
|
IDE Upgrade Utility (Non-3Ware controller cards) |
IDE Upgrade Utility (Non-3Ware controller cards)
DOS
April, 2003
(143 KB)
|
The utility runs within DOS and is used to update WD drives connected
to a host system via the primary IDE controller on the system's
motherboard. Affected drives:
- WD drives with capacities between 40GB & 120GB
- WD drives with greater than 120GB capacity with Mfg. date codes earlier than 3/25/03
Please check the Technical FAQ for additional information. Please refer to the readme.txt file for installation instructions.
Note:The utility will NOT run in DOS within Windows.
|
|
|
Old DLG Diag |
DLG Diagnostic
dlgdiag28.zip
August, 2002
(192 KB)
|
The
Diagnostics utility allows you to test the drive, print results for
last drive tested, repair errors found during the Test Drive option and
write zeros to the drive. |
|
|
Archived SCSI Software |
ASPI Menu v1.16
January, 1998
(542 KB) |
This is a MS Windows-based application that uses ASPI to provide a
generic interactive command interface to any SCSI hard drive. In
addition to providing interactive commands to a SCSI hard drive, this
tool provides advanced scripting features for writing functions such as
testing or applying updates to SCSI devices. ASPIMENU also has
extensive help text relating to SCSI.
|
WD SCSI Workbench v1.4
August, 1999
(278 KB) |
This is a MS Windows-based application that uses ASPI to provide
support and utility functions for Western Digital SCSI hard drives.
With this application you can create dump files that contain support
and log data, format drives, short stroke drives, copy one drive to
another, perform read and write/read qualification testing, generate
defect data lists, and convert between logical and physical addressing
schemes.
|
WD Scan.exe v1.0
August, 1997
(382 KB) |
This is a MS Windows-based application that uses ASPI to provide a
graphic representation of peripherals connected to the SCSI
architecture. The tool's initial release detects devices, builds the
graphic model, and provides a hexadecimal & ASCII dump of the
Inquiry data from the devices detected.
|
|
Notice:
For users familiar with our EZ-Drive, WDDiag, WDATA66, and WDTblchk
programs, these utilities have been replaced with our new Data Lifeguard Tools
software. Data Lifeguard Tools is a software suite that combines all of
our EIDE drive installation and management utilities into one easy to
use program. The utilities are also available separately.
|
á
|
|